3512cc新萄京网址,3512cc新萄京官网网址

It is well known that stainless steel anchor bolts are a very common pre-embedded fastener bolts, and it is convenient to install the anchor bolts according to the small series. Generally, the deviation adjustment should be carried out after installation. About stainless steel anchor bolts The deviation adjustments can be flipped through our previous articles, all of which are explained in great detail.

The deviation adjustment of the anchor bolts is mainly to correct some anchor bolts that are not installed properly. What should we say today is that the stainless steel anchor bolts are damaged? The anchor bolt manufacturers came to the trick. Generally used in the current construction project, in order to fix the mechanical equipment to the concrete or the reinforced concrete foundation, the anchor bolts are generally used. Once the anchor bolt is damaged, it will directly affect the normal operation of the mechanical equipment. If the problem is serious, it will directly cause the device to stop running. Once the anchor bolt is damaged, it is difficult to repair it in a short time, so the equipment is difficult to use quickly in a short time. The repair of the anchor bolts is extremely difficult. It cannot be restored to normal in a short period of time. Therefore, special attention should be paid to the pre-design of the anchor bolts. Each anchor bolt must be designed and processed according to the regulations. Particular attention should be paid to the installation and use of anchor bolts, which generally means that the center of the installation and the height and verticality are in accordance with the design requirements. When the anchor bolt is used, if any abnormal vibration is found in the equipment, it is necessary to identify the cause and eliminate the fault before it can be operated.